Sony MZ-N1 - Manual (Page 53)

53
5 Turn the control repeatedly to select a letter
and press x to enter.
The selected letter stops flashing and the
cursor moves to the next input position.
6 Repeat step 5 and enter all characters of the
label name.
7 Keep pressing x for 2 seconds or more.
A track, group, or disc is labeled.
To cancel labeling
• On the recorder
Press CANCEL.
“CANCEL?” and “PushENTER” appear
in the display, and then press the jog dial
or N.
• On the remote control
Press DISPLAY for 2 seconds or more.
z
You can store phrases that you often use in
tracks. Stored phrases can be retrieved and used
to label a track, group, or disc (page 54).
Notes
• When the recording is stopped while labeling
a track, a group, or a disc during recording, or
when the recording moves on to the next track
while labeling a track, the input at that point is
entered automatically.
• “LP:” is automatically added at the beginning
of the track name for tracks recorded in
MDLP mode (page 30).
• You cannot label or relabel the premastered
disc.
Relabeling recordings
On the recorder
1
Insert a disc and do the following
operations.
To relabel a track:
Start playing the track you want to
relabel, and change the track name
while the recorder is playing.
To relabel a group:
Turn group mode on (page 32) and
start playing the track within the
group you want to relabel or start
recording a track to the group, and
change the group name while the
recorder is playing or recording.
To relabel a disc:
Relabel a track while the recorder is
stopped or recording.
If you relabel a disc with group
settings, turn group mode on
(page 32).
2
Follow steps 2 to 4 of “Labeling
recordings” (page 51) to display a
track, group, or disc name.
3
Follow steps 5 to 8 of “Labeling
recordings” (page 51), and then keep
pressing the jog dial for 2 seconds or
more.
Functions Operation
To switch between
capital letters, small
letters, numbers/marks,
and phrases.
1)
1) If phrases are stored in the name bank, the
first phrase stored appears in the display
(page 54).
Press X.
To move the cursor to
the left or right. Pull and turn the
control (VOL +/–).
To change the letter to
the one before/next one. Turn the control
(./N>).
To insert a blank space. Press DISPLAY.
To cancel labeling. Press DISPLAY
for 2 seconds or
more.
To delete a letter. Press
PLAYMODE.
The cursor flashes at the next input position.