Customization, 21. testing the system – Sony SAT-HD300 User Manual
Page 108
107
8-21. Testing the System
Basic Test
When in Satellite mode, diagnoses essential system components of your DIRECTV
®
HD
Receiver. Once the Basic System Test is done, your HD receiver’s status will be displayed. If
any problems are detected, a short message will be displayed.
To test basic items in the HD Receiver :
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Scroll down using “
E
” on the remote control.
3. Select the System menu by pressing “
”.
4. Scroll down to System Test using “
E
”.
5. Move the highlight to the right with “
G
”.
6. “Basic Test” Info will be automatically highlighted.
7. Press “
” and the pop-up dialogue box will be displayed.
8. Press “
” to activate the System Basic test.
It will run automatically from DIRECTV Tuner to Phone Connection and if there is any problem in
your system, the pop-up box will be displayed.
9. Press the EXIT button on the remote control to return to TV viewing.
8. CUSTOMIZATION