Sony SAT-HD300 - Manual (Page 115)

114
8-24. Remote Control Setup
Your DIRECTV ® HD Receiver’s remote control can send signals to the HD Receiver in two ways.
Standard IR (Infrared) control allows the Remote Control to send signals to the HD Receiver
within a line of sight. RF (Radio Frequency) control allows the remote control to send signals
from outside a cabinet or even from another room within your home. The Remote Control RF
Antenna must be connected to use the RF Remote feature (see section 3-8).
You can also choose to assign one of two remote ID’s for IR Control or one of sixteen remote
ID’s for RF Control. This can be useful if you have more than one Sony satellite receiver in your
home or if local RF signals cause interference to your RF Remote control.
To choose the Remote Control type:
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the System menu by pressing “ ”.
4. Scroll down to Remote Control using “ E ”.
5. Pressing “ ”. Remote Control Setup Wizard will be displayed.
6. If you want the process to proceed, follow the instructions in Remote Control Setup Wizard.
7. Press the EXIT button on the remote control to return to TV viewing.