Avocent Cyclades-PR4000 - Manual (Page 108)

Cyclades-PR4000
Chapter 11 - Routing Protocols 108
1
2
3
4
5
6
...... ...... ...... ...... ...... ....
PR3000
100.10.0.0/16
Und
esired Route
Backup Route
Pr
te
eferred Rou
FIGURE 12.5 MULTIPLE ROUTES CONTAINING AS 5
CONFIG=>IP=>BGP4=>ACCESS LIST=>ADD
Parameter Description
Access List Name Name assigned to list, to indicate which interface and direction it applies to. A typical
name for the example is from_two_p.
Access List Type The AS Path type allows filtering by AS number; the Dist BGP type allows filtering by
IP address and the Community BGP type allows filtering by community. In the figure,
the filtering can be done based either on AS 5 or the address 100.10.0.0/16
Rule Status Enables the rule.
Default Scope If the default of the list is permit, the default of each rule must be deny and the
corresponding rule must define which routes must be discarded. If the default of the
list is deny, the default of each rule must be permit and the corresponding rule must
define which routes will be accepted (with all others being discarded).