Avocent Cyclades-PR4000 - Manual (Page 29)

Chapter 3 - Using CyROS Menus 29
Cyclades-PR4000
IP Traffic
After choosing the interface desired, a bar graph showing bytes per second or packets per second is displayed. It
is a snapshot of the last 10 minutes of IP traffic through the interface (TX for transmitted and RX for received), with
a refresh every minute. The arrow keys toggle the display between bytes and packets per second. Pressing
<menu select> returns to the main menu.
Syslog Messages
Selecting this menu item leads to another menu that allows changes in the display of syslog messages. Syslog
messages are administrative and debug events. The following options are available:
• Display - Exibits the last syslog message generated by CyROS. Arrow keys may be used to see the syslog
history.
• Stop - New syslog messages are discarded. The syslog history remains unchanged.
• Start - New syslog messages are stored in the syslog history and are displayed.
• Clear - Clears the syslog history.
• Quit - Returns to the main menu.
System Info
This menu item presents a sequence of four screens: Hardware Information, Board Information, Modem Information,
and Boot Information. Any arrow key switches between screens. The menu select key returns to the main menu.