Avocent Cyclades-PR4000 - Manual (Page 77)

Chapter 9 Network Protocols
77
Cyclades-PR4000
Network Protocol (IP) Menu (Continued)
Parameter Description
IP MTU Assigns the size of the Maximum Transmission Unit for the interface. This
determines whether or not a given IP datagram is fragmented.
NAT Determines the type of IP address if NAT is being used. Use Global otherwise.
See chapter 11 or the examples in chapter 4 for details on how to configure NAT.
ICMP Port Active causes the router to send ICMP Port Unreachable messages when it
receives UDP or TCP messages for ports that are not recognized. This type of
message is used by some traceroute applications, and if disabled, the router might
not be identified in the traceroute output. However, there are security and
performance reasons to leave this option
Inactive.
Incoming Rule List Filter rule list for incoming packets. See chapter 12 for instructions on how this
parameter should be set.
Detailed Incoming IP
Accounting Applies when a list is selected in the previous parameter. See explanation of IP
Accounting later in this chapter. IP Accounting for a rule requires that the
parameter CONFIG =>RULES LIST=>IP=>CONFIGURE RULES=>ADD RULE
=>ALLOW ACCOUNT PROCESS also be
Yes.
Outgoing Rule List Name Filter rule list for outgoing packets. See chapter 12 for instructions on how this
parameter should be set.
Detailed Outgoing IP
Accounting Applies when a list is selected in the previous parameter. See explanation of
Detailed Incoming IP Accounting.
Routing of Broadcast
Messages Activating this parameter causes the router to route broadcast messages from the
LAN to the WAN and vice-versa. An individual interface can be excluded by setting
this parameter to
Inactive, without effecting the broadcast of messages on the other
interfaces.