Sony ICD-MS1 - Manual (Page 23)

23
Editing Messages on the IC Recorder
To play the divided messages
continuously
Select “ON” for “CONT.” as described in
“Playing Back All Messages in a Folder
Continuously” on page 37.
Notes
• You need a certain amount of space in the
“Memory Stick“ to add an index. For more
information, see “System Limitations“ on page 64.
• You cannot add an index when “INDEX FULL“
appears in the display window. Erase some
messages before adding an index. For more
information, see “System Limitations“ on page 64.
• The recorded date and time (page 34) of the latter
part of the divided message by adding an index, is
the same as that (the starting date and time of
recording) of the divided message.
• If you add an index to a labeled message (page 28)
that was divided, the other part of the divided
message will have the same message name.
• If you add an index to a message with priority
mark(s) (page 26), priority mark(s) will be added
to both parts of the divided message.
Combining messages by
erasing the index
You can combine two messages by erasing
the index.
In stop mode, follow the steps below:
1
Press the jog lever up or down to
display the number of the second of
the two messages you want to
combine.
2
While pressing ERASE button, press
INDEX button for more than 1
second.
“ERASE INDEX” will flash for 10
seconds.
3
Press ERASE button while the
display is flashing.
The two messages are combined into one
and the messages will be renumbered as
in the illustration above.
Notes
• After combing messages by erasing an index, the
latter message's name (page 28) , alarm setting
(page 30), priority mark(s) (page 26), and the
recorded date and time (page 34) will be deleted.
• You cannot combine messages with different
recording modes.
To cancel erasing
Press STOP button before step 3.
Message 1
Message 2
Message 4
The message numbers decrease.
The index is erased.
Message 3
Message 1
Message 2
Message 3
S P
FOLDER O1
RASE INDEX E