Sony STR-DH740 - Manual (Page 38)

38 GB
To operate the iPod/iPhone
using the remote control
Press USB before you use the following
buttons.
Notes on iPod/iPhone
• The iPod/iPhone is charged when
connected to the receiver while the
receiver is turned on.
• You cannot transfer songs onto the iPod/
iPhone from this receiver.
• Do not remove the iPod/iPhone during
operation. To avoid data corruption or
damage to the iPod/iPhone, turn the
receiver off when connecting or
removing the iPod/iPhone.
iPod/iPhone message list
Playing a USB device
You can enjoy music from the USB device
by connecting it to the (USB) port on the
receiver.
For details on connecting a USB device,
see “Connecting an iPod, iPhone, USB
device” (page 28).
The music file formats that can be played
back by this receiver are as follows:
Press Operation
N Starts play.
X, x Pauses play.
m/M Fast reverses or forwards.
./> Goes to the previous/next
track.
iPhone CTRL Selects the iPod/iPhone
control mode.
. />
m /M
x X
N
HOME
USB
iPhone
CTRL
Message and explanation
Reading
The receiver is recognizing and reading
information of the iPod or iPhone.
Loading
The receiver is loading information of the
iPod or iPhone.
Not supported
An unsupported iPod or iPhone is connected.
No device is connected
No iPod or iPhone is connected.
No music
No music is found.
Headphones not supported
No sound is output from the headphones when
iPod or iPhone is connected.
File format Extensions
MP3 (MPEG-1 Audio
Layer III) “.mp3”
AAC* “.m4a”, “.3gp”,
“.mp4”
WMA9 Standard* “.wma”
WAV “.wav”