Sony STR-DH740 - Manual (Page 66)

66 GB
x Auto Standby
Lets you set the receiver switch to standby
mode automatically when you do not
operate the receiver or when there is no
signals input to the receiver.
• On: Switches to standby mode after
approximately 30 minutes.
• Off: Does not switch to standby mode.
• This function does not work when “FM” or
“AM” input is selected.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
Operating without using
the OSD
You can operate this receiver using the
display panel even if the TV is not
connected to the receiver.
1
Press AMP MENU.
The menu is displayed on the display
panel of the receiver.
2
Press V/v repeatedly to select the
menu you want, then press or
b.
3
Press V/v repeatedly to select the
parameter you want to adjust, then
press
or b.
4
Press V/v repeatedly to select the
setting you want, then press .
To return to the previous
display
Press B or RETURN O.
To exit the menu
Press AMP MENU.
Some parameters and settings may appear
dimmed on the display panel. This means that
they are either unavailable or fixed and
unchangeable.
Notes
Using the menu on the
display panel
AMP MENU
RETURN
O
V/v/B/b,
Note