Avery ALS 230 - Manual (Page 17)

Operators Manual
ALS 230
Release 11/05 Page 15 Description
2.3 Plug board
The plug board is shown in Figure 3. Beside the mains switch and the mains cable socket there
are some more holes for optional functions. Standard execution in this machine is one I/O plug
prepared for the product sensor. The connection of the other plugs is described in chapter
Connections.
If you use the optional connections, it is strongly recommended to do this by means of the
optional available SUB-D connectors. This ensures best EMI stability of the machine.
CAUTION! - The fuse holder setting you have to select according to your local
main voltage (100, 120, 200 or 230 V). You carry this out by taking off the fuse
holder and position the fuse holder insert accordingly.
Figure 3 Plug board
2.4 Electronic
As standard the complete electronic is integrated in the machine. For special requirements
(water protection e.g.) a machine version the electronic is housed in a separate cabinet is
available.
Product sensor
APSF-Sensor
Applicator
PLC control