Menu structure, Als 230 – Avery ALS 230 User Manual
Page 33
Operators Manual
ALS 230
Release 11/05
Page 31
Menu structure
5. Menu structure
The touch panel keys or the optional interface can change labeller parameters. The last
entered parameters are the actual ones the machine works with. Programming via the interface
is described in chapter Serial interface.
There are 2 levels for parameter adjustments. The first one is for parameter selection. With the
keys FUNCTION a parameter is selected. By pressing the keys ENTER the second level can
be reached. Pressing the keys FUNCTION can change the parameter values. By pressing
ENTER you quit the parameter adjustment and the next menu point is shown. For some
functions the change of values is effected immediately, for others when leaving the menu point.
Details in the menu functions.
There are 4 different menu structures:
y
Standard menu
This menu is used for normal operation. The most important parameters for the production
can be changed here. The adjustments are lost after turning off the machine.
y
Extended standard menu
This menu offers additional parameters and functions to those in the standard menu. Any
adjustments made in the extended menu are stored on quitting the menu and are
maintained even if the machine is then turned off.
• Product menu
If data banks are stored in the extended menu, the product menu can be activated. In this
menu, programmed data banks only can be selected. Changing parameters in this menu is
not possible. When storing data in a new data bank, the current adjustments are saved to
the new product data bank. You may change data values of a stored data bank by loading
the data from the extended standard menu, modifying them and resaving them in a data
bank.
y
Configuration menu
In this menu, you configure the machine according to your applications. Additionally you
have access to service test functions. This menu is mainly dedicated to service technicians.
All current parameter settings are stored on quitting the configuration menu and are
maintained if the machine is then turned off.