Avery ALS 230 - Manual (Page 6)

Operators Manual
ALS 230
Release 11/05 Page 4 Important Notes
1. Important Notes
1.1 Overview
The AVERY ALS 230 is a fully automatic labeller. Handling is very easy and can be learned
with a minimum of training. For operation, only a few adjustments are necessary. The machine
is controlled by a microprocessor and because of its programmable functions, it can be used in
many applications.
Except for cleaning the rollers and the label sensor there is no periodical maintenance
necessary. This manual should help you to operate the ALS 230. In chapter 2 the machine is
described and many expressions are explained. For normal operating chapters 3 and 4 are
important. All other chapters give additional details of the machine.
For technical questions, particularly in case of problems, your local service organisation will be
pleased to help you.
Note: This manual applies to ALS 230s equipped with a software version from 5.x
onwards.
1.1.1 Manufacturer
This machine was built by:
AVERY Maschinen GmbH
Ohmstraße 3
85386 Eching
Germany
Tel. 08165-(0)925-0
FAX 08165-(0)-3143
1.1.2 Copyright
© 2005 Avery Maschinen GmbH. All rights reserved. No part of this work covered by Avery 's
copyright may be reproduced or copied in any form or by any means (graphic, electronic or
mechanical, including photocopying, recording, recording taping, or information and retrieval
systems) without the written permission of Avery Maschinen GmbH. Avery also reserves all
other rights, including the right to make changes or corrections at any time without notice.
Avery make no representation or warranties about the accuracy, currency, completeness or
suitability of the information provided herein and will not be held liable for any use of this
information for any purpose. It is provided "as is" without express or implied warranty.
AVERY and all other related brands and product names are trademarks of Avery Dennison
Corporation. No licence to use or reproduce any of these trademarks or other trademarks of