AEG LAVAMAT 88730 - Manual (Page 20)

Operating Instructions
20
Changing the spin speed/Selecting Rinse Hold
0 If necessary, change the spin speed for the final
spin/select RINSE HOLD:
Press the Spin speed/RINSE HOLD button
repeatedly until the indicator of the required
spin speed or of RINSE HOLD illuminates.
If RINSE HOLD is selected, the washing remains in
the final rinse water. It is not spun.
3 If you do not change the spin speed, the final spin
is automatically adjusted to suit the washing programme.
The speed of the intermediate spin is dependent on the selected
programme and cannot be changed.
Setting the delay timer/soaking duration
Delay timer
The DELAY TIMER button allows the start of a washing programme to
be delayed by 1 hour up to a maximum of 19 hours.
0 To do this, press the DELAY TIMER button
repeatedly until the desired start delay
is shown in the multi-display, e.g. 12h for
a 12 hour delay.
If 19h is displayed and you press again, the du-
ration of the washing programme set appears
(displayed in minutes, e.g. 125). In this state
the start delay timer is not set.
Soaking duration
When the SOAKING button is pressed, you can extend the soaking pe-
riod from 1 hour to a maximum of 19 hours with the DELAY TIMER but-
ton.
3 Without a time delay, the soaking period is approximately 1 hour.
– COTTONS/LINEN 1800 revolutions per minute
– EASY CARES/EASY IRON 1200 revolutions per minute
– DELICATES 1200 revolutions per minute
– WOOLLENS/
P (hand wash)
1200 revolutions per minute
– SILK/
P (hand wash)
1200 revolutions per minute