Start the washing programme – AEG LAVAMAT 88730 User Manual

Page 23

Advertising
background image

Operating Instructions

23

Start the washing programme

0

1. Check that the water tap is open.

2. Start the washing programme: Press the START/PAUSE

button.
The washing programme is started, or starts at the end
of the time delay set.

3

If the display DOOR/LIGHT flashes red when the START/PAUSE button is
pressed, the door is not closed correctly. Press the door firmly and press
the START/PAUSE button again.

If the time preselection is set:
The start time delay set on the time delay counts down; the remaining
time until the programme starts is displayed on the multi-display (in
hours remaining). During this time you can add washing and change or
stop the delay timer.
• Load the washing: Press the START/PAUSE button. The door can be

opened. Then close the door and press the START/PAUSE button
again.

• Changing or stopping delay timer: Press the DELAY TIMER button re-

peatedly until the desired time is displayed; when the programme du-
ration is displayed (shown in minutes e.g. 125), the wash programme
starts without delay.

Advertising