AEG LAVAMAT 88730 - Manual (Page 39)

Operating Instructions
39
Programme protection
To safeguard a programme setting against unwanted changes (e.g. pro-
gramme selector turned, option buttons pressed etc., you can set the
Programme protection. This prevents your washing being damaged.
3 The programme protection can be set and cancelled at any time during
a programme.
Select programme protection:
0 1. Select the desired programme settings.
2. To start the programme, press the START/PAUSE button.
3. Keep the PREWASH and SOAKING buttons pressed simultaneously for
5 seconds. The programme progress display flashes for 5 seconds.
The programme protection function is set.
3 As long as the programme protection is set, you cannot make any other
settings. The door cannot be opened with the DOOR/LIGHT button. Also
after the washing cycle has ended, you must first cancel the pro-
gramme protection before you can open the door.
If you attempt to change the selected setting by pressing a button dur-
ing the washing cycle, the programme progress display flashes for
5 seconds.
If you attempt to change the selected setting by turning the pro-
gramme selector, the programme progress display flashes until the orig-
inal setting of the programme selector is restored. The washing cycle is
not influenced in either case.
3 The programme selector must be in its original setting before you can
cancel the programme protection.
Cancelling programme protection:
0 Keep the PREWASH and SOAKING buttons pressed simultaneously for
5 seconds. The programme progress display flashes for 5 seconds, then
it is illuminated for 5 seconds. Programme protection is cancelled.