Alloy Computer Products GSM-8T16SFP - Manual (Page 101)

GSM Series User Manual
97
Alloy Computer Products Pty Ltd Copyright ©2006
3-15-4. Parameter Setting
Fig. 3-62
Function name:
Parameter Setting
Function description:
This section is used to configure the parameter settings for each port using 802.1x port
security.
Parameters description:
Port:
The port number to be selected to configure 802.1x parameters.
Port Control:
This is used to set the operation mode of the port. There are three modes
supported ForceUnauthorised, ForceAuthorised and Auto.
- ForceUnauthorised: The controlled port is forced to stay in the unauthorised
state.
- ForceAuthorised: The controlled port is forced to stay in the authorised state.
- Auto: The controlled port will determine its authorisation state depending on
the result of the authentication between the authentication server and the
supplicant.
Default: Auto
reAuthMAx (1-10):
The number of authentication attempts that are permitted before the port
becomes unauthorised.
Default: 2