Alloy Computer Products GSM-8T16SFP - Manual (Page 145)

GSM Series User Manual
141
Alloy Computer Products Pty Ltd Copyright ©2006
ƒ bandwidth
enable ingress-rate
Syntax:
enable ingress-rate <range> <data_rate>
Description:
Used to set up the Ingress-rate of each port on the switch.
Argument:
<range>:syntax 1,5-7, available from 1 to 16 (GSM-16T2SFP), 1 – 24 (GSM-24T2SFP, GSM-
8T16SFP).
<data_rate>: 0-1000Mbps.
Possible value:
<range>: 1 to 16 (GSM-16T2SFP), 1 to 24 (GSM-24T2SFP, GSM-8T16SFP).
<data_rate>: 0-1000Mbps.
Example:
GSM-16T2SFP(bandwidth)# enable ingress-rate 1-16 100
: Enables an ingress rate of 100Mbps on all 16 ports.
enable storm-rate
Syntax:
enable storm-rate <range> <data_rate>
Description:
Used to configure the storm-rate of each port(s).
Argument:
<range>:syntax 1,5-7, available from 1 to 16 (GSM-16T2SFP), 1 – 24 (GSM-24T2SFP, GSM-
8T16SFP).
<data_rate>: 0-1000Mbps.
Possible value:
<range>: 1 to 16 (GSM-16T2SFP), 1 to 24 (GSM-24T2SFP, GSM-8T16SFP).
<data_rate>: 0-1000Mbps.
Example:
GSM-16T2SFP(bandwidth)# enable storm-rate 1-16 150
: Enables the broadcast storm rate on ports 1 through to 16 at 150.