Alloy Computer Products GSM-8T16SFP - Manual (Page 65)

GSM Series User Manual
61
Alloy Computer Products Pty Ltd Copyright ©2006
3-10-2. Tag-based Group
Fig. 3-32
Function name:
Tag-based Group Configuration
Function description:
Shows information of the existing tag-based VLAN groups, the administrator can also
Add, Delete and Edit VLAN’s using the function buttons provided.
Parameters description:
VLAN Name:
Is the name of the VLAN group defined by the Administrator. Valid characters
that can be used are A – Z, a – z and 0 – 9. Special characters are not allowed
and a total of 15 characters are supported.
VID:
VID is the VLAN Identifier. Each tag-based VLAN group must have a unique VID.
SYM-VLAN:
Used to add additional security to the switch. If the SYM-VLAN function of the
group is enabled, all packets with this group VID will be dropped in case they are
transmitted from the ports that do not belong to this group.
Member:
This is used to add or remove a particular port from the VLAN group, tick the
check box next to the port number you would like to be a member of the group.
Add:
Used to create a new tag-based VLAN group, enter the name and the VID and
select whether you would like to enable SYM-VLAN. You will now have to select
what ports you would like to belong to this group. Click the Apply button for the