Alloy Computer Products GSM-8T16SFP - Manual (Page 39)

GSM Series User Manual
35
Alloy Computer Products Pty Ltd Copyright ©2006
Mode:
Is used to set the speed and duplex settings for a particular port. If Auto is
displayed the port is running in auto-negotiation mode. If you are connecting to a
device that is having trouble linking when running in Auto mode you made need
to manually force the speed and duplex settings of the port. The port can be
forced to 10Mbps Half Duplex (10M/Half), 10Mbps Full Duplex (10M/Full),
100Mbps Half Duplex (100M/Half), 100Mbps Full Duplex (100M/Full) and 1G Full
Duplex (1G/Full).
Default: Auto
Flow Control:
Shows the port’s flow control status. The GSM Series switches support both
Backpressure flow control for Half Duplex and Pause flow control for Full Duplex.
Select Enable to enable flow control and Disable to disable flow control.
Default: Enabled