Alloy Computer Products GSM-8T16SFP - Manual (Page 32)

GSM Series User Manual
28
Alloy Computer Products Pty Ltd Copyright ©2006
Incoming Port:
If you want to lock the management interface access down to certain ports on
your switch please select the Custom radio button and tick the required ports
which will allow/deny access to the management. Otherwise select the Any radio
button.
Access Type:
After you have determined what physical access has been granted or denied to
the management you now need to specify what management access is allowed.
If you wish to allow/deny a particular type of access, select the Custom radio
button and select the type of access required, HTTP, Telnet or SNMP. Otherwise
select the Any radio button.
Action:
Now that you have created your management access rule you now need to
specify whether the rule is going to be used to allow or deny access to the
management. Select the desired radio button.
Edit/Create:
Once you have configured your management access rule click the Edit/Create
button to add the rule.
If you have an existing rule that you want to edit select the rule from the list,
make your changes and click on the edit button.
Delete:
Select a rule from the list and click the Delete button to remove that rule.