Alloy Computer Products GSM-8T16SFP - Manual (Page 73)

GSM Series User Manual
69
Alloy Computer Products Pty Ltd Copyright ©2006
Search:
Is used to search for MAC addresses that are connected to the switch. The
search will depend on the criteria entered in the above section. For example if
you have all ports selected the switch will display all MAC address connected to
all ports of the switch. If you wish to search for a particular MAC address, enter
the MAC address in the Search section and click Search.
Previous Page:
If the MAC table can not be displayed on one page, it will be displayed across
multiple, click on previous page to move between pages.
Next Page:
If the MAC table can not be displayed on one page, it will be displayed across
multiple, click on next page to move between pages.
The MAC table will be displayed after a search has been performed. The MAC table consists of
the following information:
Alias:
The Alias of the searched MAC entries.
MAC Address:
The MAC Address of the searched MAC entries.
Port:
The port in which the MAC addresses were found.
VID:
VLAN group in which the searched MAC address exists.
State:
Displays the method used to discover the MAC address, this can either be Static
or Dynamic.