Panasonic HC-V250K - Manual (Page 91)

- 91 -
∫ To set the music
1 Touch [Music].
2 Touch the desired sound.
≥ When [NO MUSIC] is selected, the audio recorded at the time of shooting is played back.
(To test the music audio)
Touch [START].
≥ Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
3 Touch [ENTER].
∫ To save a manually-edited scene
You can save manually edited scenes as a single scene.
The recorded scenes can be saved in the SD card.
1 Stop the playback of a manually-edited scene or wait until the playback is
finished.
2 Touch [SAVE].
3 Select the format to save.
≥ When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/60p are converted to 1080/60i
(picture quality [HA] of [REC MODE]) and saved.
≥ Scenes recorded in 1080/60i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.
4 Touch [YES].
≥ If you are using the battery, a message recommending that you use the AC adaptor will be
displayed. To start the saving operation, touch [START].
5 Touch [EXIT].
≥ You can save scenes even when using the battery, but we recommend that you use the AC
adaptor.
≥ For information on the approximate free space requirements for saving a manually edited scene,
refer to page 89 .
[QUALITY (AVCHD)]: It will be saved in high-definition image quality.
[Compatibility (MP4/High)]: It will be saved with an image quality of 1280k720/30p,
allowing you to upload it on the Internet in higher image
quality. The format supports playback on a PC.
[Compatibility (MP4/Low)]: It will be saved with an image quality of 640k360/30p,
allowing you to upload it on the Internet faster. The format
supports playback on a PC.