Panasonic TH65PF12EK - Manual (Page 11)

SLOT2
AUDIO
DVI-D IN
SLOT3
P R /C R /R P B /C B /B Y/G
COMPONENT/RGB IN LAN
AUDIO
AUDIO
OUT
Y , P
B
, P
R
,
OUT
P
R
P
B
Y
L
R
COMPONEN T VIDEO OUT
11
Connections
DVI-D connection
Mini-plug (M3)
DVI-D
video cable
(Within 5 m) PC with DVI-D
video out
Pin No. Signal Name Pin No. Signal Name
1 T.M.D.S. data 2- 13
2 T.M.D.S. data 2+ 14 +5 V DC
3 T.M.D.S. data 2 shield 15 Ground
4 16 Hot plug detect
5 17 T.M.D.S. data 0-
6 DDC clock 18 T.M.D.S. data 0+
7 DDC data 19 T.M.D.S. data 0 shield
8 20
9 T.M.D.S. data 1- 21
10 T.M.D.S. data 1+ 22 T.M.D.S. clock shield
11 T.M.D.S. data 1 shield 23 T.M.D.S. clock+
12 24 T.M.D.S. clock-
Notes:
• Additional equipment, cables and adapter plugs shown are not supplied with this set.
• Refer to page 49 for applicable input signal.
• Use the DVI-D cable complying with the DVI standard. Image deterioration may occur depending on the length or
the quality of the cable.
DVI-D Input Connector
Pin Layouts
Connection port view
16
17 24
8 1
9
COMPONENT / RGB connection
Notes:
• Change the “Component/RGB-in select” setting in the “Setup” menu to “Component”
(when Component signal connection) or “RGB” (when RGB signal connection). (see page 46)
• Additional equipment, cables and adapter plugs shown are not supplied with this set.
• Sync on G signal is needed. (see page 50)
RCA-BNC
adapter plug
Mini-plug (M3)
Computer RGB Camcorder
or
DVD
Example of input signal source
Digital TV-SET-TOP-BOX
(DTV-STB)
This unit has terminal boards equivalent to DVI-D Terminal Board (TY-FB11DD) as standard equipment.