Panasonic TH65PF12EK - Manual (Page 31)

Sound
Normal Normalise
Normal
0
0
0
Off
Treble
0 Mid
Sound Mode
Balance
Bass
Surround
Main Audio Out (PIP)
1/2
31
Sound Adjustment
1
Press to display the Sound menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
2
Select to adjust each item.
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( / Normalise Normalisation)
3
Press to exit from adjust mode.
SDI Sound Output
This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is installed to the unit.
2/2
Sound Out
Left Channel
Right Channel Channel 1
Channel 1
Off
Level Meter Off
SDI Sound Output
Item Details
Left Channel
Channel 1 to Channel 16
Selects left audio channel.
Right Channel
Channel 1 to Channel 16
Selects right audio channel.
Sound Out
On Off
On: Enables audio output.
Off: Disables audio output.
Level Meter
Off 1-8ch 9-16ch
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
Off: Hides the audio level meter.
1-8ch: Displays the audio level meter (1-8ch)
9-16ch: Displays the audio level meter (9-16ch)
Notes:
• This menu is available only when
selecting a slot that HD-SDI Terminal
Board with audio (TY-FB10HD) or
Dual Link HD-SDI Terminal Board (TY-
FB11DHD) is installed.
• This menu is unavailable when 2-picture
display mode is active.
Note: Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.
Item Details
Sound Mode
Normal: Emits the original sound.
Dynamic: Accentuates sharp sound.
Clear: Attenuates human voice.
Bass Adjusts low pitch sounds.
Mid Adjusts normal sounds.
Treble Adjusts high pitch sounds.
Balance Adjusts left and right volumes.
Surround Select On or Off.
Audio Out (PIP)
Main: Selects main picture sound.
Sub: Selects PIP frame sound.
A
B
INPUT1
PC A
B
INPUT1
PC
Musical note ♪ is displayed on right side of the audio
output screen label.