Panasonic TH65PF12EK - Manual (Page 36)

36
Notes:
• This function does not work in the following cases.
When “MULTI DISPLAY Setup” is set to “On”
When “PORTRAIT Setup” is set to “On”
When in digital zoom mode
• Some of the screen may appear to be missing depending on the screen setting conditions.
Peak limit
On: Suppresses image contrast (peak brightness).
Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 59)
Reduces screen image retention
Express settings
Set the “Image Retention Reduction” menu to the recommended settings.
All menus will be locked.
Picture Mode: Normal
Contrast: 10
Side panel: High
NANODRIFT Saver: High mid
Peak limit: On
1
Select “Express settings”.
Express settings
Custom settings
Reset
Extended life settings
1 select
2 access
2
Select the input to apply the settings.
Apply to current input
Apply to all inputs
Extended life settings
1 select
2 set
3
Select “Yes”.
Apply to current input
No Yes
Extended life settings
1 select
2 set
NANODRIFT Saver
Moves the display position of the screen slightly to reduce image retention on the display panel.
Off: If, for example, the side bars are displayed, moves the display position of the screen when the power is turned
on and when the picture is muted (VMT command input).
Min–Max: Moves the display position of the screen at set time intervals. You can set the screen movement range.
If you change the value, a mask is displayed in the range where the picture is missing as a result of position
movement.
If this is set to other than “Off”, the current setting value is
displayed below the input display.
PC
NANODRIFT High mid
16:9