Panasonic TH65PF12EK - Manual (Page 19)

19
MULTI PIP
Transparent Function and Insertion Function:
Two functions are available for blend PIP: the transparent function and the insertion function. Set these functions with
“Transparency” or “Insert” in “MULTI PIP Setup”. (see page 43)
Transparent Function:
Data such as text are displayed transparently on the
background image.
Insertion Function:
The sub screen image is divided into transparent and non-
transparent areas, and only the non-transparent areas are
inserted and displayed on the background image.
Note:
Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the blend PIP
function to make a composite screen display, you may be violating the copyright under copyright law. It is prohibited to show or
alter the copyrighted materials of other people for commercial purposes without the prior permission of the copyright holder.
Swapping Screens Selecting the Target Screen for Operations
Each time this button is pressed, the main screen
and sub screen are swapped.
Each time this button is pressed, the target screen
for operations changes.
Two screens
(P and P)
Main
screen
Sub
screen
Two screens
(P out P)
Two screens
(P in P)
PC
INPUT1
PC
INPUT1
Main screen Sub screen
Main screen input mode Sub screen input mode
Operations on the
main screen
Operations on the
sub screen
Notes:
• When operations are performed for the sub screen, the
sub screen audio is played.
• If no operations are performed, the operation target
returns to the main screen after about 5 seconds. You
can also return to main screen operations by operating
the remote control buttons (except for
).
Selecting the Sub Screen Position (During P in P Display)
Each time this button is pressed, the sub screen position changes.
Note:
Some sub screen positions may hide the display
of the menu screen.
Notes:
• Do not use the two-screen display for a long time. It will cause a permanent image retention to remain on the screen.
• If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
• Sound output is from the picture which is selected in Audio OUT (PIP) (see page 31).
• In two-screen display, the same input mode cannot be selected for the main picture and sub picture.
• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of
the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals
displayed on the main picture and depending on the two-screen display mode.
• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
• Computer screen picture is displayed in a simplifi ed format, and it may not be possible to discern details on them satisfactorily.
• Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
• 2k1k signals that are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD) cannot be displayed in two-screen display.