Panasonic TH65PF12EK - Manual (Page 43)

43
PIP
—
Off
0%
Off
1
MULTI PIP Setup
MULTI PIP
Display Mode
Transparency
Transparency level
Insert
Insert level
2/2 Setup
MULTI DISPLAY Setup
MULTI PIP Setup
Portrait Setup
Set up TIMER
MULTI PIP Setup
Set the two-screen display function that is activated when is pressed.
Press to select the MULTI PIP Setup.
Press to display the “MULTI PIP Setup” menu.
Press to display the Setup menu.
1
2
3 Press to select the menu to adjust.
Press to adjust the menu.
Sub Screen Insertion (During BLEND PIP)
1 Select “On” in “Insert”.
2 Set the “Insert level”. (1 to 10 %)
Set the brightness level threshold for discriminating between the transparent areas and non-transparent areas on
the sub screen.
Setting example Image to insert (sub screen) Insert level
Background image
(main screen) Two-picture Insertion
Only the areas on the overlay
image that are brighter
than the “Insert level” are
displayed on the background
image. 10 %
1 %
Note: “Transparency” cannot be set when “Insert” is “On”.
Transparent Display of the Sub Screen (During Blend PIP)
1 Select “On” in “Transparency”.
2 Set the transparency level for the sub screen in “Transparency level”. (0 to 100 %)
Setting example Transparent image (sub screen)
0 %: No transparency 100 %: Fully transparent
Note: “Insert” cannot be set when “Transparency” is “On”.
MULTI PIP
Set the two-screen function.
PIP Advanced PIP
Blend PIP
Display Mode
The display mode can be changed separately for each function that was set in “MULTI PIP Setup”.
For “PIP”:
— (One screen) P and P P out P P in P
For “Advanced PIP”: — (One screen)
1 to 8
For “Blend PIP”:
— (One screen) Full P in P
Note: The display mode changes in the same way when is pressed.