IPricot IPR-S1000 - Manual (Page 18)

Configuring the IPR-S1000
13
3) Select «111. LNB», and enter that menu by pressing the «right»
arrow.
Example:
4) With the «+» or «-» key, select a band.
5) Confirm the selection by pressing the «down» arrow.
112. Frequency
This screen allows you to enter the DVB carrier frequency.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
3) With the «down» arrow select «112. Frequency», and enter that
menu by pressing the «right» arrow.
Example:
4) Enter a value using the same method that you used to set the IP
address.
Note: The frequency must be bounded by LNB limits, otherwise the
value will be rejected.
5) Confirm the value by pressing the «down» arrow.
113. Bauds
This screen allows you to modify the baud rate (in thousands of
symbols per second). It is a floating point number bounded by 1000 to
45000 Kbauds values.
LNB:
High Band
Low band
Universal LNB
C-Band 3.7>4.2
C-Band 3.625>4.2
C-Band 3.4>4.2
L-Band 0.95>2.15
Frequency:
12.3790000GHz