Panasonic NE1027 - Manual (Page 14)

English
NE-1037
- 14 -
How to Operate
√ Programming the Double Quantity Pad:
Your oven is preset at the factory to automatically double the programmed time for multiple portion heating.
This model allows you to customize the heating time and/or power level for multiple portions of your menu
items.
For example, if Memory Pad 2 is set for 20 seconds at 1000 W, 40 seconds at 1000 W is set for double
quantity heating automatically. However, if your own tests have determined that the correct heating time
required for two portions is less (only 30 seconds at 1000 W), you can program as shown below.
Example: To program 30 seconds at 1000 W on double quantity of Memory Pad 2 (display must be blank)
1.
2.
3.
4.
5.
6.
PAD INSTRUCTION
≥ Press the Program Pad.
Note:
≥
If no “g” Indicator appeared on display,
“Program Lock” should be canselled.
(See page 15.)
≥ Press Double Quantity Pad.
≥ Press the Memory Pad 2.
The pad number and the previously selected
time and power level for double quantity heating
will briefly appear in the display.
≥ The pad number and Stage Heating Indicator will
reappear in the display.
≥ Press the Power Level Selector Pad once.
The Memory Pad number will go out.
≥ Press Memory Pads 3 and 0.
≥ Press the Program Pad again. You have
completed programming the selected Memory
Pad for double quantity heating.
≥ 2 seconds later, the display will confirm your
programming.
≥ 2 seconds later, the display will go blank.
NOTE: ≥Program the remaining Memory Pads as desired by repeating steps 1–6 above. You may insert up to
10 memory programs.
NOTE: ≥ When the Program indicator “g” is blinking, the program can be cancelled and/or the pad number
erased by pressing the Stop/Reset Pad.
3
0
x2
2
x2
x2 1
x2 1
x2 1
x2 1
x2 1
x2 1
x2 1