Panasonic NE1027 - Manual (Page 8)

English
NE-1037
- 8 -
Power Level Pad
Program Pad
Double Quantity
(t2) Pad
Strat Pad
Stop/Reset Pad
Control Panel (NE-1037)
Digital Display Window
Indicator Locations
A–Program Change Indicator
B– Double Quantity (t2) Heating
Indicator
C– Memory Pad Number and Heating
Time Display (min. sec.)
D– Heating Stage Indicator
E– Power Level Indicator
d 1000 W
a 500 W
b 340 W (Defrost)
This oven is preset at the factory for the following
1. Memory Pads preset to 1000 W at the indicated heating times foe single stage heating.
The Double Quantity Pad (k2) preset to automatically double the programmed time of each Memory Pad.
(See pages 11, 14)
2. Program Unlock. (See page 15)
3. Cycle counter set to “0”. (See page 17)
Pad No.
Time
1
10 sec.
2
20 sec.
3
30 sec.
4
45 sec.
5
1 min.
6
1 min.
30 sec.
7
2 min.
8
2 min.
30 sec.
9
3 min.
0
1 min.
30 sec.
Display
The display will go blank (when
the door is closed):
≥ at more than 1 minute
interruption.
≥ at more than 1 minute after
completion of heating and
removing food.
The display will flash “0”.
≥ continuously if door is not
opened to remove the food.
Oven Lamp
Oven lamp will be turned on,
when:
≥ door is opened.
≥ heating strats.
Oven lamp will be turned off,
when:
≥ door is closed (no heating).
≥ heating finishes.
Stop/Reset Pad
1. While heating, one touch on the
Stop/Reset Pad stops the oven.
You can restart by pressing the
Start Pad or a secong touch on
the Stop/Reset Pad will cancel
the selected program.
2. One touch on the Stop/Reset
Pad, before the heating cycle is
started, will cancel the selected
program.
x2 1 2 3
x2
1
2
3
4
5
6
7
8
9
0
x2 1 2 3
B A
C
D
E
Memory Pads