Panasonic NE1027 - Manual (Page 16)

English
NE-1037
- 16 -
How to Operate
E. To Read Program List:
Allows you to review all currently programmed pad number, heating time and power level for each stage.
1.
2.
3.
PAD INSTRUCTION
≥ Open the door.
≥ While pressing the Stop/Reset Pad, press the
Start Pad. The beep tone setting will be shown
in the display window.
Example:
Stage Indicator 1: Beep tone is ON.
Stage Indicator 2: Beep tone is OFF.
≥ 2 seconds later, the Program Lock setting will be
shown is the display window.
Program Lock: “P L”
Program Unlock: “P”
≥ Press the Memory Pad you desire to read the
program.
Example:
The Memory Pad 5. The display window will
show; Program Memory Pad 5, first stage
heating time and power level currently
programmed on Memory Pad.
≥ 2 seconds later, the information of 2nd and 3rd
stage haeting will be displayed.
≥ After all settings have been displayed, the pad
number and the Stage Heating Indicator will
appear in the display again.
NOTE: ≥If you want to go to another program, press the Memory Pad you desire in order to read the program,
while the information of Memory Pad is being displayed.
NOTE: ≥ If you want to see the Double Quantity Heating (k2) program, press the Double Quantity Pad before
pressing the Memory Pad.
5
+
1
1 2
1
2
3
1 2