Antunes, AJ SE-4200/4400 - Manual (Page 14)

SE-4200/4400 WATER FILTRATION SYSTEM
14 P/N 1010852 Rev. C 04/06
OPERATION (continued)
5. The system displays the SET ENABLE PASSWORD
display. The default setting is off. If you do not
want to use a password, press the Enter but-
ton. The system will then display the SELECT
LANGUAGE display. The default setting is English
(other languages are not available at this time).
Press the Enter button to accept the default.
6. The system displays the SET PASSWORD display.
From this display, you can press the Menu button
to exit this mode. If you DO choose to set a pass-
word, follow these steps.
a. Press the Enter button, use the Left and Right
arrow buttons to change the setting to on, and
press the Enter button.
b. The system displays the SET NEW PASSWORD?
prompt. The default value is off. Use the Left
and Right arrow buttons to switch the value to
on , and press the Enter button.
c. The system then displays the ENTER NEW
PASSWORD prompt.
NOTE: Passwords are limited to 4 alpha-numeric
characters. Think of a password that is easy for
you to remember but difficult for others to guess.
Write your password down and store it in a safe
location.
d. Use the Up and Down arrow buttons to enter
each character of your password. When the
character is correct, press Enter to move to the
next character. When finished, press the Enter
button.
e. The system displays the RE-ENTER PASSWORD
display. Enter your new password again as
described above.
f. The system will then display the PROTECT
KEYS display. The default value is off. Accept
this setting with the default value by pressing
Enter.
NOTE: Do not set the PROTECT KEYS function to
“on.” Contact the manufacturer for instructions on
using this function.
g. The system then returns to the SET LANGUAGE
display. Press the Enter button to return to the
SET PASSWORD display. Then, press the Menu
button to return to STOP MODE. Press the
Run Button to return to FILTER MODE.
NOTE: The REVIEW HISTORY mode displays infor-
mation about the most recent operation first.
5. When finished reviewing history, press the Enter
button. The system will display the REVIEW OF
CYCLES display. Press Menu to return to STOP
MODE.
6. Press the Run button to return to FILTER MODE.
INTERNAL TESTS MODE
1. From the FILTER MODE display, press the Stop
button. The system displays the STOP MODE dis-
play.
2. Press the Menu button.
3. Using the Up and Down arrow buttons, scroll from
SET PASSWORD to INTERNAL TESTS and press
the Enter button.
4. In this mode, valve, sensor, and alarm status can
be viewed and changed. Use the Up and Down
arrow buttons to view the different settings. Use
the Left and Right arrow buttons to toggle different
options on and off.
IMPORTANT
This feature is ONLY to be used for servicing the
system or to diagnose problems.
5. To exit this mode, press the Menu button. The
system will display the INTERNAL TESTS display.
Press the Menu button to return to the STOP
MODE display.
6. Press the Run button to return to FILTER MODE.
SET PASSWORD MODE
NOTE: A password does NOT need to be set for
proper operation of the system. The password
function should ONLY be used to protect the time,
flush, and feature settings from being changed.
After setting a password, that password MUST be
used before accessing any Menu features.
1. From the FILTER MODE display, press the Stop
button. The system displays the STOP MODE dis-
play.
2. Press the Menu button.
3. If not already displayed, use the Up and Down
arrow buttons to scroll to SET PASSWORD, and
press the Enter button.