Apollo 150 - Manual (Page 162)

User Manual version 2207
APOLLO 120/150 III 9-152
9.1.5. Calibrate the MicroTouch Touchscreen
After the touchscreen and TouchWare are installed, you must
calibrate the touchscreen.
Calibration serve two purposes:
- Sets the active area of the touchscreen
- Aligns the touchscreen’s active area to the underlying
video
- To calibrate the touchscreen, use the Calibrate option
on the Touchscreen control panel and follow the
directions displayed on the screen. For more
information, please refer to the online help or
MicroTouch website.
-
Note: Before calibrating the touchscreen, let the
display warm up for several minutes and then
center the video image within the screen area.
Also, always calibrate the touchscreen at the
display video resolution that you touch
application will use.