Apollo 150 - Manual (Page 172)

User Manual version 2207
APOLLO 120/150 III 9-162
11. Close the Registry Editor by clicking the Close box.
12. Restart the computer.
13. Click the Start button, then click Settings, and then
click Control Panel.
14. Double-click Elo Touchscreen to run the Touchscreen
Control panel.
15. Click the Calibrate button and touch each of the three
targets as they appear on the screen. Click Yes when
the cursor lines up correctly with your finger. Click OK
to close the Touchscreen Control panel.
NOTES
- Full-screen DOS mode is not supported. However,
Windowed DOS mode is fully supported. A touch to a
full-screen DOS session will cause your system to
immediately return to your Windows desktop. A
mouse can be used to access programs run in
full-screen DOS mode.
- Windows 95 may lock up during startup if the resource
settings in the Setup dialog of the Touchscreen Control
Panel do not match the actual controller configuration.
Use Safe Mode to start Windows 95 and change the
resource settings to match the controller configuration,
then restart Windows 95.
- The touchscreen driver may cause Windows 95 to lock
up during Shutdown if the touchscreen is activated
after Shutdown is initiated.