Apollo 150 - Manual (Page 175)

User Manual version 2007
APOLLO 120/150 III
9-165
9.2.5. Installing MonitorMouse for Win NT
1. Start your computer.
2. Insert the MonitorMouse for Windows NT disk into drive
A.
3. Click the Start button, and then click Run.
4. Type "a:\setup" in the space provided and press
<Enter>.
5. Follow the directions on the screen.
6. The Touchscreen Setup Wizard will appear. You will need
to specify the touchscreen controller on COM3 (IRQ 10).
Also specify the language you want to use in the
Touchscreen Control Panel.
7. Complete the Setup program.
8. Shutdown and restart Windows NT.
9. Click the Start button, then click Settings, and then click
Control Panel.
10. Double-click Elo Touchscreen to run the Touchscreen
Control Panel.
11. Click the Calibrate button and touch each of the three
targets as they appear on the screen. Touch Yes when the
cursor lines up correctly with your finger. Touch OK to
close the Touchscreen Control Panel.