American Dryer Corp. Phase 6 Microprocessor Controls ML-190HS - Manual (Page 20)

16
SECTION V
SERVICING
INTRODUCTION
ALL electrical/mechanical service or repairs should be made with the electrical power to the dryer disconnected
(power off).
WARNING: PERSONAL INJURY COULD RESULT.
The information provided in this section should not be misconstrued as a device for use by an untrained person
making repairs. Service work should be performed by competent technicians in accordance with local, state,
and federal codes.
When contacting the factory for assistance, always have the dryer model and serial numbers available.
CAUTION: Observe ALL safety precautions displayed on the dryer or specified in this manual before
and while making repairs.
Before considering replacement, make sure that ALL connectors are in place and making proper contact.