American Dryer Corp. Phase 6 Microprocessor Controls ML-190HS - Manual (Page 62)

58
D. TOOL LIST
Straight Head Screwdriver
Phillips Head Screwdriver
Sensor Pin and Socket Tool (P/N 122801)
Pliers
1/4” Nut Driver
3/8” Open End Wrench
5/8” Open End Wrench
5/8” Deep Socket Wrench
3/8” Socket Wrench
1/2” Socket or Open End Wrench
1/4” Open End Wrench
5/16” Socket or Open End Wrench
1/2” Socket Wrench
7/16” Socket or Open End Wrench
5/16” Nut Driver
12” Pipe Wrench (2)
1/8” “T” Shaped or “L” Shaped Allen Wrench
3/16” “T” Shaped or “L” Shaped Allen Wrench
Wire Cutters
1/2” Allen Wrench
3/8” Allen Wrench
Channel Locks
Manometer (ADC P/N 122804)
MP Pin Extraction Tool (ADC P/N 122800)