Deluxe food warmer, Operation (continued), Figure 7. control programming sequence – Antunes, AJ Series 9100100 User Manual

Page 13

Advertising
background image

DELUXE FOOD WARMER

12

P/N 1010678 Rev. F 09/04

DELUXE FOOD WARMER

13

P/N 1010678 Rev. F 09/04

OPERATION (continued)

7. Press and release the Program button again and

use the UP or DOWN arrow buttons to change the

SHO setting in minutes (Item F, Figure 7).

NOTE: 00 minutes is recommended.

8. Press and release the Program button again and

H2O is displayed (Item G, Figure 7).

9. To change the H2O setting, press and release the

Program button again to display the setting (Item

H, Figure 7). Use the UP or DOWN arrow buttons

to increase or decrease the time.

NOTE: Recommended settings are :

• DFW/DFWT/DFWF-250 [0_50]
• DFW/DFWT-150 [0_08]

10. Press either the Start/Stop or Operate button to

store the changes and to exit the PROGRAM

mode.

NOTE: The Start/Stop or Operate button may be

pressed at any time during programming to store

the changes and exit the PROGRAM mode.

NOTE: If no change is made within 5 seconds at

any time during the programming process, all

changes made up to that point are stored in memo-

ry and the control reverts to the OPERATION mode.

READY

UP

DOWN

PROGRAM

START/STOP

POWER

1500

Figure 7. Control Programming Sequence

READY

UP

DOWN

PROGRAM

START/STOP

POWER

15

READY

UP

DOWN

PROGRAM

START/STOP

POWER

00

READY

UP

DOWN

PROGRAM

START/STOP

POWER

Advertising