EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 11)

II. Function Introduction
4. When the copy task has finished, the system will close the session.
5. The disc will be ejected, and you can continue to copy another memory
card or USB.
**Note:
1 As long as the disc was a multi-session disc, it will not support
disc spanning copy.
2 If the data size is larger than the disc’s capacity, the
system will require you to plug more than one disc. Please
make sure the disc spanning function is enabled, you can set it
up in 6-2. Disc spanning, page 17.
3 Rewritable discs do not support multi-session copy. Due to the
feature of CD±RW and DVD±RW rewritable format, the first
session can be copied successfully, but when you want to
build up the second one, the system will erase the first session
of +RW format disc, and an error message “Not Blank Disc”
for –RW format disc.
In Disc Spanning Mode:
1. Insert a Flash device (ex: USB, SD, MMS…) into the proper slot as source
and place a disc into writer tray as target for duplication.
2. Select 1. Copy and press to start copying.
11