EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 12)

II. Function Introduction
3. The system will detect the source and calculate how many discs are
needed.
4. After detecting, the system will start to copy.
Disc 1 Total discs needed
The data size
for disc 1
Copied data size
5. When the first disc has finished copying, the disc will be ejected, and wait
for the
next disc.
** Note:
1 Disc spanning cannot be executed at the same time with
Multidisc mode. When both modes are enabled, the
system will execute disc spanning first.
2. Compare
The compare function has two different displays for discs copied by Multi-
Session and Disc Spanning.
1. Insert a Flash device (ex: USB, SD, MMS…) into the proper slot as
source and place a disc into writer tray as a target for duplication.
2. Select 2.Compare and press to start comparison.
12