EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 22)

II. Function Introduction
8. Setup
1. Auto Start Time
A l l o w t h e s y s t e m t o d o t h e Copy
Test, Compare and Copy + Compare
functions automatically
2. Display Mode
1. Basic
2. Show Speed
3. Show Timer
3. Button Beep
4. Eject On Start
1. Eject All Discs
To eject all trays with discs inside
when the system is booted up.
2. Do Not Eject
Do not eject any tray or disc
when the system is booted up.
3. Eject Target Only
Only eject target trays with discs
inside when the system is booted up
4. Eject Source Only
Only eject source disc when the
system is booted up.
5. Eject All Trays
To eject all trays when the system
is booted up.
5. Reader Speed
To adjust the reading speed of a
source drive.
6. Compare Speed
To adjust the speed of drives
while comparing.
7. Language
8. Clear Setup
To reset functions back to
manufacturer’s default setting.
9. Advanced Setup
1. Power On Time
To set a warm-up time from 5 seconds
to 99 seconds.
2. Startup Menu
To select which function you would like
to show up
in the beginning.
3. Skip Reader Error
To set skip the read error and
keep copying.
4. Change Bad Master
To make the system eject a bad source
disc and ask for another one if the
source disc is unreadable to the system.
5. CD Overburn Set to copy overburn CD.
6. Show HDD Image
Name
To show HDD image name or capacity
on Copy, Test, Copy + Compare and
Compare function
7. Keep Buffer
To enable or disable load source to the
buffer.
8. Boot Password
To enable or disable the users
administrative password.
9. Setup Password To set up the login password.
22