EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 25)

II. Function Introduction
**Note:
Due to default setting of auto start time, the duplicator will start
to copy automatically within a few seconds. You can set “OFF”
to close the auto start function or set a longer waiting time. The
default setting is 5 seconds. (About this setting please refer to 8-1.
Auto Start Time, page 33)
If HDD is selected to be the source reader, you have to upload the source
to the built-in HDD and then follow the copy process to do your copy task.
How to upload data from disc to HDD please refer to 9-2. Disc to Image,
page 37.
**Note:
The default setting of source reader is the first drive.
2. Test
This function will simulate the copy process to ensure error free duplication.
During the simulation, there will be nothing written in the recordable discs.
1. Using / to select 2.Test and press .
2. Press to start test
3. Once the test task is finished, the discs will be ejected and the result of
the pass and fail discs for the test task will show on the LCD:
25