EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 28)

II. Function Introduction
6. Select Source
You can set any drive or built-in HDD in the duplicator to be your source
reader.
1. Using / to select 6.Select Source
2. Press to check the current source reader, or select the proper drive
to be the source reader by pressing / , once the source reader is
selected, press to confirm the setting and back to the menu list.
**Note:
The default setting of source reader is the first drive.
7. Utility
7-1. Information
You can check the information of disc, drive and system by this function. By
pressing / , each disc or drive’s information will show on the LCD.
1. Using / to select 7.Utility, press to enter the sub menu. Then,
select 1.Information and press .
2. Using / to select 1.Disc Info. or 2.Drive Info. or 3.System Info., and
press to see the related information.
28