EZ Dupe Multi-Format 1 Copy Duplicator - Manual (Page 30)

II. Function Introduction
3. Using / to select 1.Quick Erase. or 2.Full Erase.
OR
4. Press to execute the erasing task. When the system is detecting
the discs, you will see the colon flashing.
The Second Drive
5. When the erase task is in process, you should see the O and o
blinking.
6. Once the erase task has finished, the O stops blinking, the disc will
eject automatically.
**Note:
1 If you place a new DVD+RW to execute quick erase or full
erase, the system will format automatically and you will see F
and f blinking on LCD display.
2 Erase function only supports rewritable discs.
7-3. PreScan Source
This function will scan and detect any bad sectors existing in the source disc,
which helps you to ensure the readability of source disc.
30