Led indicators – ADIC DS9000 Series User Manual
Page 32
20
Operation and Maintenance
LED Indicators
Use the following table to determine the drive’s operating condition:
Right Indicator Panel LED
Label
Color State
Operating Condition
Write Protected
Orange ON
OFF
Tape is write-protected.
Tape is write-enabled.
Tape in Use
Yellow Blinking
ON
Tape is moving.
Tape is loaded; ready for use.
Use Cleaning Tape
Yellow ON
Remains on after
unloading cleaning
tape
After cleaning, turns
on again when
reloading data
cartridge
Drive head needs cleaning, or the
tape is bad.
Cleaning attempted, but tape expired,
so cleaning not performed.
Problem data cartridge. Try another
cartridge.
Operate Handle
Green ON
OFF
Blinking
OK to operate the Cartridge
Insert/Release Handle.
Do not operate the Cartridge
Insert/Release Handle.
Drive was powered on with door
open. Close door and let drive
complete initialization.
All Right Indicator Panel
LEDs or,
All Left Indicator Panel
LEDs
.
ON
Blinking
POST is starting.
An error has occurred.
(Continued on next page)