ADIC DS9000 Series - Manual (Page 33)

Operation and Maintenance 21
Left Indicator Panel LED
Label Color State Operating Condition
2.6 (ADIC 4000, DS9400D/L,
DS9700D) Yellow ON
Blinking
Tape is recorded in 2.6 format.
Tape is recorded in another density. The
density selection was chosen earlier from
BOT.
6.0 (ADIC 4000, DS9400D/L,
DS9700D) Yellow ON
Blinking
Tape is recorded in 6.0 format.
Tape is recorded in another density. The
density selection was chosen earlier from
BOT.
10.0 (ADIC 4000,
DS9400D/L) Yellow ON (default)
Blinking
Tape is recorded in 10.0 format.
Tape is recorded in another density. The
density selection was chosen earlier from
BOT.
10.0/15.0 (DS9700D,
DS9800D) Yellow ON (default)
Blinking
Tape is recorded in 10.0 or 15.0 format.
Tape is recorded in another density. The
density selection was chosen earlier from
BOT.
20.0 (ADIC 4000,
DS9400D/L, DS9700D,
DS9800D) Yellow ON (default)
Blinking
Tape is recorded in 20.0 format.
Tape is recorded in another density. The
density selection was chosen earlier from
BOT.
35.0 (DS9700D, DS9800D) Yellow ON (default)
Blinking
Tape is recorded in 35.0 format.
Tape is recorded in another density. The
density selection was chosen earlier from
BOT.
40.0 (DS9800D) Yellow ON (default)
Blinking
Tape is recorded in 40.0 format.
Tape is recorded in another density. The
density selection was chosen earlier from
BOT.
Compress Yellow ON
OFF
Compression mode enabled.
(Compression can be done only in 10.0,
15.0, 20.0, 35.0, and 40.0 density.)
Compression mode disabled.
Density Override Yellow ON
OFF (default)
Blinking
A density setting was selected earlier from
the front panel.
Density will be selected by the host
(automatic).
The unit is in density selection mode.
All Right Indicator Panel
LEDs, or,
all Left Indicator Panel
LEDs
.
Blinking A POST error has occurred.