ADIC DS9000 Series - Manual (Page 35)

Operation and Maintenance 23
Drive Operating Condition LCD Message
When tape is loaded.
“type” = 4000 OMX (DS9400D/L), 7000 OMX (DS9700D) or
8000 OMX (DS9800D).
“Compressed” if compression mode enabled or “Standard” if
compression mode disabled.
“15/30 GB” is drive dependent. “15/30 GB” = DLT2000XT,
“20/40 GB” = DLT4000, “35/70 GB” = DLT7000, and “40/80 GB
= DLT8000.
This is the normal “Ready Screen”.
If write-protected tape is inserted.
During loading of a write-protected tape, the display will change
from:
“Loading >>>” to “Write Protected Tape Inside Drive”, the LCD
back-light will toggle on/off and an audible alarm will sound.
Write-protected tape fully loaded.
“WPT” = Write Protected Tape in unit.
“WPT” will toggle to “GB” and back to “WPT” and continue
toggling until next drive action.
Continued on next page.