ADIC DS9000 Series - Manual (Page 37)

Operation and Maintenance 25
Drive Operating Condition LCD Message
If new tape, or the drive cannot
initialize the tape.
followed by:
followed by:
A hardware error occurs during
normal operation.
Loading the Data Cartridge
Warnings
N
Before loading into a drive, ensure that all other items from this package
are separated from the cartridge.
N
Never press in on the hub portion of the data cartridge.
N
Static electricity may cause the label or other items included in the
package to occasionally cling to the DLT cartridge.
5 In order to write data to, or erase data from the cartridge, check that the Write-Protect switch on the
cartridge is in the write-enabled position - all the way to the right.
Caution
A data cartridge can be loaded only when the Operate Handle LED is ON.
Do not attempt to open the Cartridge Insert/Release Handle unless this
LED is ON steady.
5 Lift up on the Cartridge Insert/Release Handle.