Kramer Electronics VP-725NA - Manual (Page 26)

VP-725NA - Operating the VP-725NA Presentation Switcher/Scaler 21
6 Operating the VP-725NA Presentation
Switcher/Scaler
The VP-725NA includes the following front panel buttons:
• A set of 21 INPUT SELECTOR buttons
• A set of Video Group and Audio Group SELECT buttons as well as Scaler
Mode and Master Audio buttons
The VIDEO GROUP SELECT button selects the video input from each group to switch
to its group output. The SCALER SELECT button scales the selected video input (one
of 21) at each of the SCALED OUTPUTS.
• A PIP button
• A FREEZE button
• A set of 7 OSD buttons: OSD ON, MENU, ENTER, -, +, UP, and DOWN
This section describes how to:
• Use the different operating modes (see Section 6.1 )
• Switch an input to an output (see Section 6.2 )
• Understand the audio features (see Section 6.3 )
• Use the PIP feature (see Section 6.4 )
• Lock and unlock the front panel buttons (see Section 6.5 )
• Freeze the image (see Section 6.6 )
• Display a blank screen (see Section 6.7 )
6.1 Using the Operating Modes
The VP-725NA operates as five independent 4x1 switchers and as a scaler that
switches one of the 21 inputs to the scaled outputs. These modes operate
simultaneously, as well as independently.
Composite video, s-Video, component video (RGB or YPbPr), HDMI and UXGA