Kramer Electronics VP-725NA - Manual (Page 36)

VP-725NA - Configuring and Controlling the VP-725NA 31
7.1.2 The Picture Screen
Figure 15 defines the Picture screen.
Figure 15: Picture Screen
Picture Screen
Setting Function Default
Brightness Adjust the brightness: -50 to 50 0
Contrast Adjust the contrast: -50 to 50 0
Color Adjust the color: -50 to 50 0
Hue Adjust the hue: -180 to 180 0
Sharpness Adjust the sharpness: -50 to 50 0
Output Gamma Adjust the gamma: Gamma 1 to Gamma 5 Gamma 1
Film Mode Set the film mode: Auto, Video, Film Auto
Temporal NR
You do not have to press
ENTER after selecting the
desired parameter to change it
Set the temporal noise reduction level: Off, Low,
Medium, High
High
Mosquito NR Set the Mosquito noise reduction level: Off, Low,
Medium, High
Low
Block NR Set the block noise reduction level: Off, On Off
Detail Enhancement Set the detail enhancement: Off, Low, Medium,
High
Set to Off for VGA and HDMI inputs; set to Medium for
CV/YC/YUV inputs
Medium
Luma Transition Enhance Set the luminance transition enhance level: Off,
Low, High
Low
Chroma Transition Enhance Set the chrominance transition enhance level: Off,
Low, High
Off